Safari Pedals Everything Bundle 2026.05 — Mac build

The Safari Pedals Everything Bundle runs on any Mac with macOS 11 or later, on both Apple Silicon and Intel. That covers most machines still getting updates, so compatibility is rarely the reason to skip it.

What the bundle includes

• Sun bear
• Camel Strip
• Bull Sub Machine
• Flamingo Verb
• Yak Delay
• Level-Or
• Ladybug Reverb
• Fox Echo Chorus
• Owl Control
• Cassette Bunny (added in 2026.05)

Camel Strip, Bull Sub Machine, and Level-Or shape the mix

The bundle leans on character pedals rather than transparent utility. Camel Strip handles the mid-forward glue, Bull Sub Machine adds weight below the kick, and Level-Or works as a simple leveling tool that doesn't overthink. Flamingo Verb and Ladybug Reverb give you two flavors of space — one short and springy, the other wider and darker. Yak Delay and Fox Echo Chorus cover time-based movement, while Owl Control tames peaks without obvious pumping. Each plugin keeps its controls minimal, so you spend less time tweaking and more time deciding whether the effect fits the track. Cassette Bunny brings that worn tape saturation when you need it. The collection is the full Safari Pedals lineup in one package.

Native Apple Silicon and Intel support with VST3, AU, or AAX

The bundle loads as VST3, AU, or AAX, so it fits into any DAW that supports those formats. Because the plugins are native to both Apple Silicon and Intel, you won't need Rosetta or wrapper layers. Activation is handled by a keygen — the included package has an installer with clear instructions. No iLok, no cloud login. If you have used other Safari Pedals releases, the workflow is the same. The 2026.05 build is the current version, and the only change from the previous one is the addition of Cassette Bunny. If you already own a few of these pedals, the bundle replaces them with a single installer.

A workflow: adding color to a dull mix bus

Start with a mix that feels flat. Insert Camel Strip on the master bus. Set the drive low — just enough to add harmonics without pushing the level too high. Next, bring in Bull Sub Machine on a send. Send only the kick and bass to it, blend to taste. The sub harmonics will sit below 60 Hz, so check the mix on headphones or a subwoofer. After that, add Fox Echo Chorus on an aux. Use a slow rate and a low mix — 15 to 20 percent — to widen the stereo image without making it swim. Finally, put Owl Control at the end of the chain. Set it to catch the peaks that push past -3 dB. The result is a mix that sounds thicker and wider without audible artifacts. Save the preset if the DAW supports it, so you can recall it on other projects.

Lower Bull Sub Machine crossover to 40 Hz for deeper sub

The defaults are usable, but a few tweaks help early on. In Bull Sub Machine, the crossover frequency defaults to around 60 Hz. Lower it to 40 Hz if the room or headphones can reproduce it. In Flamingo Verb, the decay is set to a medium length. Shorten it for percussive elements, lengthen it for pads. In Dirty Dog Reverb, the pre-delay is off by default. Adding 10 to 20 ms cleans up the attack on vocals. In Yak Delay, the feedback is conservative. Increase it slightly if you want trails that decay naturally. In Cassette Bunny, the wow and flutter rate is set to a moderate speed. Slow it down for a gentler wobble, speed it up for obvious tape warble. These are starting points — adjust to the source material.

Stacking all four reverbs on one track washes out the mix

The most common one is stacking too many reverbs. Flamingo Verb, Ladybug Reverb, Dirty Dog Reverb, and Rhino Reverb each occupy a different frequency band or character. Using all four on one track washes out the mix. Pick one per instrument group. Another mistake is overdriving Camel Strip on every channel. It adds harmonics, but on drums or vocals it can turn harsh if the input is already hot. Start with the drive at 20 percent and raise it only if needed. Beginners also tend to ignore the wet/dry mix on Yak Delay and Fox Echo Chorus. Running them at 100 percent wet buries the original signal. Keep the mix below 50 percent for clarity. With Bull Sub Machine, a frequent error is sending the entire mix to it. The plugin is designed for low-frequency material. Sending cymbals or high-pitched synths to it adds mud. Route only bass elements. The key is to use each pedal as a specialized tool, not as a blanket processor.

Unified bundle versus Soundtoys' separate installers

The Everything Bundle competes with plugin collections like Soundtoys Effect Rack and iZotope Neutron. Soundtoys offers more modulation options — phasers, flangers, and pitch shifts — but requires separate installers for each effect. The Safari Pedals bundle gives you a single installer and a cohesive visual language. Neutron focuses on mixing assistance with track assistant and unison technology, while the Everything Bundle is purely about character and tone shaping. Neutron is transparent; Safari Pedals is colored. If you need surgical EQ and dynamic control, Neutron is the better fit. If you want dirt, width, and atmosphere, the Everything Bundle covers that. In terms of CPU usage, the Safari Pedals plugins are lighter than Soundtoys' emulations on Apple Silicon. None of the three collections cover the same range, so the choice depends on the mix style. The Everything Bundle is the strongest of the three for adding vintage character quickly, especially with the addition of Cassette Bunny in the 2026.05 update.

Plugin format notes

All plugins in the bundle are available as VST3, AU, and AAX on macOS. If you use Ableton Live, Logic Pro, or Pro Tools, you can choose the format that matches your workflow. The AU versions are native to Apple Silicon, so Logic Pro and GarageBand users get full performance without bridging. The VST3 versions work in Reaper and FL Studio. The AAX versions are for Pro Tools. No one format is better — pick the one your DAW prefers.

• Added Cassette Bunny.

• macOS 11 or later
• Apple Silicon or Intel